Heat Exchangers

Features

CABERO Ammonia evaporators are well suited to refrigeration plants operating on DX or pump circulation Ammonia. They are used for blast freezing, cool or cold storage, loading areas, processing plants or special application areas requiring medium or low temperature cooling. Cabero Ammonia evaporators are designed with end users in mind offering high quality and exceptional technology individually catered for particular applications.

Designed for each installation and optimised to best suit their operation and provide optimal cooling result and safe-guard cooled product. In line tube configuration brings its advantages of minimised moisture removal.

Casings are made of galvanised steel or aluminium sheets, powder coated RAL 9010, or optional stainless steel sheets.

IEHGA series:

Single coil draw-through evaporators, with fin spacing of 5, 8, 10 and 12 mm made of ø 15.8mm or ø 20mm steel tubes and steel fins all hot-dip galvanised.

IEHSA series:

Single coil draw-through evaporators with fin spacing of 4, 7, 10 and 12mm made of stainless steel 304 or 316 tubes of ø 15.8mm or ø 20 mm diameter and aluminium, coated Al or AlMg3 fins.

IDHGA series:

Double coil blow-through evaporators, with fin spacing of 5, 8, 10 and 12 mm made of ø 15.8 or ø 20 mm steel tubes and steel fins all hot-dip galvanised.

IDHSA series:

Double coil blow-through evaporators, with fin spacing of 4, 7, 10 and 12mm, made of stainless steel 304 or 316 tubes ø 15.8 or ø 20 mm diameter and aluminium, coated Al or AlMg3 fins.

Application: refrigeration – processing, storage, freezing, chilling

Capacity range: 5 - 140 kW

Refrigerants: ammonia (R717), CO2 (R744), including all Freons and glycols

Air direction: horizontal, vertical or inclined

Construction

  • Tubes: Stainless or galvanised
  • Steel fins: Al, coated AL, AlMg3 or galvanised steel casing: aluminium or galvanised, powder coated RAL 9010 or stainless steel